1) remove glove box and the dash strip that goes accross the dash from left to right.
2) unscrew the bolts holding the center dash piece in place and pull the piece out
3) unscrew all the silver screws that hold the LH and RH sides in place. There's about 7 on the RH side, and 9 I think on the left. The left side will require you to pull the gauge cluster cover off which gently pulls off and un clips basically.

It's a pretty straight forward install, I did it without any instructions.

The RH side that I am selling is just the airbag cover portion of the dash, you will have to un bolt the airbag from your old one and re-install it on this one. THe good news here is that you don't even need to disconnect the airbag to do this. HOWEVER I do also have an extra RH airbag if you want it to be just a straight forward bolt in.